Ricoh CL7000 Operating Instructions Manual page 87

D D D D
Click the [NetWare] tab, and make the following settings:
A In the [Print Server Name:] box, enter the name of the print server.
B In the [File Server Name:] box, enter the name of the file server in which a print server is to
be created.
By clicking [Browse], you can select a file server among those listed in the [Browse File Server]
dialog box.
C In the [NDS Context:] box, enter the context of the print server.
By clicking [Browse], you can select NDS tree and NDS context from those listed in the [Browse
Context] dialog box.
For context, object names are entered from a lower object and divided by a period. For example,
if you want to create a print server into Net under DS, enter "NET.DS":
D In the [Print Server Operation Mode] group, click [As Print Server].
E Click [OK] to close the property sheet.
F After the confirmation dialog box appears, click [OK].
E E E E
Exit SmartNetMonitor for Admin.
After this step, proceed to step
Operating Instructions
H
on p.88 "Setting Up as a Remote
Administrator Reference
Printer".
87