Ricoh CL7000 Operating Instructions Manual page 73

A Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display "Active Protocol", and then press the { { { { Enter #} } } } key.
Active Protocol:
TCP/IP
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display "NetWare".
C Press the { { { { Enter #} } } } key.
The current setting appears on the display.
NetWare:
*Active
D Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display "NetWare".
E Press the { { { { Enter #} } } } key.
After about two seconds, the display returns to "Active Protocol".
F Press the { { { { Escape} } } } key.
The display returns to "Network Setup".
G G G G
Select the frame type for NetWare.
Select one of the following items if necessary:
• Auto (Default)
• Ethernet ll
• Ethernet 802.3
• Ethernet 802.2
• Ethernet SNAP
Operating Instructions Administrator Reference
73