Spool Job
Use the "spoolsw" command to configure the Job Spool settings. Spool printing supports the "lpr" and
"ipp" protocols.
View Setting
The Job Spool settings appear.
msh>spoolsw
Configuration
Select [on] to enable Job Spool, or [off] to disable it.
msh>spoolsw spool {on|off}
Clearing a Spool Job
If the printer gets turned off accidentally during a spool job, you can have the job reprinted when it
is turned back on.
msh>spoolsw clearjob {on|off}
Protocol configuration
To change the protocol settings, use the following command. You can specify the settings for "lpr"
or "ipp".
lpr msh>spoolsw lpr {on|off}
ipp msh>spoolsw ipp {on|off}
Operating Instructions
Administrator Reference
216