Changing Names And Comments - Ricoh CL7000 Operating Instructions Manual

Changing Names and Comments

You can change printer names and attach comments to help identify printers listed on SmartNetMonitor
for Admin.
SmartNetMonitor for Admin allows you to change names and comments when TCP/IP is available.
The following utilities are used to change printer names and comments:
Note
Each of the names, in TCP/IP form (printer name) and NetBEUI form, is changed individually. Com-
ments are, however, common to both protocols.
The factory default name consists of "RNP" and the last 3 bytes of the MAC address on the network
interface board. For example, if the MAC address is 00:00:74:62:7D:D5, the factory default name is
"RNP627DD5". Comments are not configured.
A A A A
Start the Web browser.
B B B B
Enter the address "http://(IP address of the printer for which you want to change settings)".
The status of the selected printer is displayed on the Web browser.
C C C C
Click [Configuration].
A dialog box that prompts you to enter the user name and a password appears.
D D D D
Enter the user name and the password, and then click [OK].
Enter only the password in this dialog box. The factory default password is "password".
Operating Instructions Administrator Reference
113