Using Dhcp - Ricoh CL7000 Operating Instructions Manual

Using DHCP

You can use the printer under a DHCP environment. You can also register the printer NetBIOS name
on a WINS server when it is running.
Limitation
DHCP cannot be used with IEEE 1394 (IP over 1394). Set a fixed IP address using the control panel,
telnet, or a Web browser.
• See Setup Guide.
• See p.196 "TCP/IP
• See p.108 "Configuring the Network Interface Board
Note
Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS
server. See p.217 "WINS".
Supported DHCP server is Windows NT 4.0 Server Service Pack 4 or later, Windows 2000 Server,
and NetWare 5/5.1, 6.
If you do not use the WINS server, reserve the printer's IP address in the DHCP server so the same
IP address is assigned every time.
DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN line, it will
result in expensive line charges. This is because your computer connects to the ISDN line whenever
a packet is transferred from the printer.
Operating Instructions
address".
Administrator Reference
Settings".
251