Ricoh CL7000 Operating Instructions Manual page 170

Operating Instructions
Menu
SSID
You can make settings for SSID in Infrastructure mode and 802.11 Ad hoc
mode.
Limitation
Select "¥" if you want to enter "/" in the SSID. Also, "¥" appears
when printing the configuration page, read it as "/".
Note
Up to 32 ASCII characters in the range 0x20-0x7e can be used.
The SSID setting is case-sensitive.
An SSID value is automatically set to the nearest access point
if the setting has not been made.
If the setting has not been made for 802.11 Ad hoc mode, the
same value for Infrastructure mode or an "ASSID" value is au-
tomatically set.
WEP Setting
You can set the WEP encryption key for IEEE 802.11b.
Note
Default: Not Active
With 64-bit WEP, you can use a 10-digit hexadecimal key. With
128-bit WEP, you can use a 26-digit hexadecimal key.
IEEE 802.11b communication is only possible when a WEP key
has been specified. Set WEP to [Active].
Administrator Reference
Description
170