Ricoh CL7000 Operating Instructions Manual page 243

Message
IEEE 802.11b Tx Rate <Transfer Speed>
inetd start.
<interface> started with IP: <IP address>
<Interface>: Subnet overlap.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=&percnt;d.
job canceled. jobid=&percnt;d.
LeaseTime=<lease time>(sec), RenewTime=<renew
time>(sec).
Operating Instructions
Causes and solutions
The IEEE 802.11b transmitting speed (set speed) is dis-
played.
Example: IEEE 802.11b Tx Rate 11Mbps
Transmission speed varies according to signal quality.
Actual transmission speed may differ from the displayed
value.
An inetd has started.
<IP address> has been set for <Interface> and <Inter-
face> started.
Subnet from Netmask and the IP address you tried to set
for <Interface> overlap the subnet of another interface.
Set Subnet so that it does not overlap with another inter-
face.
The printer could not authenticate the name of the user at-
tempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job has been canceled due to an error or user
request.
The spooled job has been canceled due to an error or user
request.
The resource lease time received from the DHCP server
is <lease time> in seconds. The renewal time is also <re-
new time> in seconds.
Administrator Reference
243