Ricoh CL7000 Operating Instructions Manual page 198

- Address -
- -
Subnet Mask
A number used to numerically "mask" or hide the IP address by eliminating those parts of the ad-
dress that are alike for all the machines on a particular network.
Note
To get the above addresses, consult your network administrator.
The subnet mask is the same as that for the LAN interface and IEEE 802.11b interface.
When installing the optional 1394 interface unit, set the subnet so that it does not overlap with the
LAN interface or the IEEE 1394 interface.
Access Control
Use the "access" command to view and configure access control. You can also specify two or more
access ranges.
Reference
msh> access
Operating Instructions Administrator Reference
198