Ricoh CL7000 Operating Instructions Manual page 208

Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears:
msh> Input user number (1 to 10):
Enter the number, user name, and password.
msh> IPP user name:user1 msh> IPP password:*******
After configuring the settings, the following message appears:
User configuration changed.
SPRINT
To make setting for IEEE 1394 (SCSI print), use the "sprint" command.
View settings
The IEEE 1394 (SCSI print) settings are displayed.
msh> sprint
Bidirectional configuration for the IEEE 1394 (SCSI print)
Use this setting to set the IEEE 1394 (SCSI print) to bidirectional.
The factory default is "on".
msh> sprint bidi [on/off]
Operating Instructions Administrator Reference
208