Time-zone Configuration
You can specify the time difference between the printer clock and NTP server clock.
msh> sntp timezone +/-hour_time
Example: To set the time-zone difference to +8 hours:
msh> sntp timezone +08:00
Note
The time is in 24-hour notation.
Changing the Password
Use the "passwd" command to change the remote maintenance password.
Important
Be sure not to forget or lose the password.
Note
The default factory password is "password".
A A A A
Enter "passwd".
msh> passwd
B B B B
Enter the current password.
Old password:
Operating Instructions
Administrator Reference
220