Table of Contents
Advertisement
v Before you install a new microprocessor, download and install the most current
level of UEFI code (see "Updating firmware and device drivers" on page 31).
v When you install a second microprocessor, you might have to install additional
memory, or redistribute memory across the DIMM connectors (see "Installing a
memory module" on page 66).
v The microprocessor installation tool might become worn after several uses. Make
sure that the tool can hold the microprocessor securely if you are reusing an
existing microprocessor installation tool. Do not return the tool with other parts
that you are returning.
v The server supports only one microprocessor when the certain microprocessor is
installed in microprocessor socket 1. For example, microprocessor Intel Pentium
1403, Intel Pentium 1407, or Intel Xeon E5-1410. The following illustration
attached on the microprocessor socket 2 filler shows that microprocessor socket 2
is not supported.
The following illustration shows how to install a microprocessor and heat sink in
the blade server.
Chapter 5. Removing and replacing blade server components
85
Advertisement
Table of Contents
