Lenovo BladeCenter HS23E Problem Determination And Service Manual page 120

Table of Contents

Advertisement

106
BladeCenter HS23E Type 8038 and 8039: Problem Determination and Service Guide
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See Chapter 4, "Parts listing," on page 41 to determine which components are
consumable, structural, or CRU parts.
v If an action step is preceded by "(Trained technician only)," that step must be
performed only by a trained technician.
Diagnostic
code
Message
I.1800F
[I.1800F] A
processor family
mismatch has been
detected for one or
more processor
packages.
I.18010
[I.18010] A
processor stepping
mismatch has been
detected for one or
more processor
packages.
Description
Action
Processors have
1. Make sure the microprocessor is
mismatched
supported by the blade server.
Family.
See http://www.ibm.com/
systems/info/x86servers/
serverproven/compat/us/ .
2. Check the IBM support website
for an applicable retain tip or
firmware update that applies to
this error.
3. Run the Setup utility and select
System Information
Summary
view the microprocessor
information to compare the
installed microprocessor
specifications.
4. (Trained technician only) Remove
and replace one of the
microprocessors so that they both
match (see "Removing a
microprocessor and heat sink" on
page 81 and "Installing a
microprocessor and heat sink" on
page 84).
Processors of the
1. Make sure the microprocessor is
same model have
supported by the blade server.
mismatched
See http://www.ibm.com/
Stepping ID.
systems/info/x86servers/
serverproven/compat/us/ .
2. Check the IBM support website
for an applicable retain tip or
firmware update that applies to
this error.
3. Run the Setup utility and select
System Information
Summary
view the microprocessor
information to compare the
installed microprocessor
specifications.
4. (Trained technician only) Remove
and replace one of the
microprocessors so that they both
match (see "Removing a
microprocessor and heat sink" on
page 81 and "Installing a
microprocessor and heat sink" on
page 84).
System
Processor Details to
System
Processor Details to

Advertisement

Table of Contents
loading

This manual is also suitable for:

80388039

Table of Contents