Lenovo BladeCenter HS23E Problem Determination And Service Manual page 74

1. Bend the air baffle (as shown in the illustration).
2. Remove the 4 sticker covers from the air baffle.
3. Align the hole on the air baffle with the system board (as shown in the
4. Stick the air baffle on the system board, components, and the storage filler.
5. Install heat sink 1 (see "Installing a microprocessor and heat sink" on page 84).
6. Install the cover onto the blade server (see "Installing the blade server cover"
7. Install the blade server into the BladeCenter unit (see "Installing the blade
60
BladeCenter HS23E Type 8038 and 8039: Problem Determination and Service Guide
illustration).
Make sure the air baffle is installed securely.
on page 53).
server in a BladeCenter unit" on page 50).