Ftp Show Command; Show Ftp - Nortel Versalar 15000 Reference Manual

show ftp

FTP Show Command

This section describes the FTP show command and the information in the table the
router displays.
show ftp
The
the Nortel Networks File Transfer Protocol (FTP) service. For more information
about the Nortel Networks implementation of FTP, see Configuring IP Services.
The output includes the following information:
Default Volume
Idle Timeout
Max Sessions
Max Login Retries
Transfer Type
Control Type
Data Type
TCP Window Size
Logins
Logins Failed
Files Received
60
command displays configuration and statistical information about
show ftp
File system volume to which transferred files are written
and from which they are retrieved. The volume number
corresponds to the slot number on which the volume
resides.
Timeout (in seconds) to close the FTP control connection
if the connection remains idle. The default is 900 seconds
(15 minutes).
Maximum number of FTP sessions allowed at one time.
The default is 3 sessions.
Maximum number of FTP login retries allowed after a
login failure. The default is 3 retries.
File transfer type: ASCII or Binary.
Type of service (TOS) value set for control connection in
the IP datagram that specifies to the Transport Layer how
the datagram should be handled. The options are Normal
and Low Delay, with Low Delay being the default.
Type of service (TOS) value set for data transfer in the IP
datagram that specifies to the Transport Layer how the
datagram should be handled. The options are Normal
and High Throughput, with High Throughput being the
default.
Size in bytes of the windows used for FTP TCP
connections. The default is 16,000 bytes.
Number of successful FTP logins.
Number of FTP logins that failed.
Number of files successfully received.
308689-B Rev 00