Show Isis L2Stats; Show Isis Lspdetail - Nortel Versalar 15000 Reference Manual

The output includes the following information:
LSP ID
Lifetime
Sequence #
Flags (P/ATT/OL/IS)
Checksum

show isis l2stats

The
information. This command allows for the following command filter (flag) and
filter argument:
[-ip-address] <value>
The output includes the following information:
IP Address
Hellos Tx/Hellos Rx
LSPs Tx/LSPs Rx
PSNPs Tx/PSNPs Rx
CSNPs Tx/CSNPs Rx
Dropped LSPs
308689-B Rev 00
command displays IS-IS Layer 2 (L2) statistics
show isis l2 stats
ID of the LSP.
Lifetime of the LSP after which it will be considered
expired.
Sequence number of the LSP.
Type of flag associated with the LSP.
Checksum of the LSP.
Displays statistics for the interface with the specified IP
address.
IP address of each interface.
Number of ISIS hello packets transmitted and received.
Number of Link State Packets (LSPs) transmitted and
received.
Number of Partial Sequence Number Packets (PSNPs)
transmitted and received.
Number of Complete Sequence Number Packets
(CSNPs) transmitted and received.
Number of ISIS packets dropped because of invalid
information in the packet.
show isis l2stats
101