Show Logical-Line Vc Stats - Nortel Versalar 15000 Reference Manual

show logical-line vc stats

show logical-line vc stats
The
collected for a specified frame relay virtual circuit (VC). Only IP packets are
included.
This command allows for the following options:
-slot <slot_number>
-name <circuit_name>
<circuit_name>
The output includes the following information:
Logical line over Mct3 vc stats
Name
Slot/Conn/Chan/Index
Dlci
RxBelowCIR
Packets/Octets/Tx Packets
RxAboveCIR
Packets/Octets/Tx Drops
RxAboveBR
Packets/Octets/Tx Octets
116
show logical-line vc stats
command displays all packet and octet statistics
Displays QoS statistics for the specified slot only.
Displays QoS statistics for the specified circuit only.
Displays QoS statistics for the specified circuit only.
User-defined name for the logical line.
Identifies the slot, DS3 connector, DS1 channel, and the
index for this line instance.
The index ranges from 1 to 24 (for T1) and 1 to 31 (for
E1). This number differentiates multiple logical lines
configured on the same DS1.
The number of the circuit on which DLCI is configured.
Number of packets/octets received below the committed
information rate (CIR), and number of Tx packets
transmitted.
Number of packets/octets received that exceeded the
CIR, but were within the allocated burst rate (BR), and
number of packets that should have been transmitted, but
that were dropped due to lack of buffering resources.
Number of packets/octets received that exceeded the
allocated BR and number of octets transmitted.
308689-B Rev 00