Show T1 Qos Summary - Nortel Versalar 15000 Reference Manual

show t1 qos summary

T1 over Mcoc3 qos stats
Interface
Queue
RxBelowCIR Packets/Octets
RxAboveCIR Packets/Octets
RxAboveBR Packets/Octets
Tx Packets/Octets
Dropped Packets
show t1 qos summary
The
all MCT1 QoS circuits, or for a specific circuit. This command allows for the
following options:
-slot <name>
-package -name <name>
-name <name>
<value>
The output includes the following information:
T1 over Mct3 qos summary
Interface
Service Package
Queue Name
162
show t1 qos summary
Name of the T3 circuit.
Queue for which data was collected.
Number of packets/octets received that were below the
committed information rate (CIR).
Number of packets/octets received that exceeded the
CIR, but were within the allocated burst rate (BR).
Number of packets/octets received that exceeded the
allocated BR.
Number of packets/octets transmitted.
Number of packets that should have been transmitted,
but that were dropped due to lack of buffering resources.
command displays MCT1 summary information for
Displays QoS statistics for a specific slot.
Displays QoS statistics for the specified package or
queue.
Displays QoS statistics for a specific interface.
Displays QoS statistics for the specified
slot/connector/channel.
Name of the DS1 circuit.
QoS service package used for this line.
Queue for which data was collected.
308689-B Rev 00