Show Frame-Relay Summary - Nortel Versalar 15000 Reference Manual

The output contains the following information:
Interface
Last Error -- Type
Last Error -- Time
Faults
Outbound Drops
Inbound Discards

show frame-relay summary

The
all frame relay interfaces. You can display the current operational status and
interface type. The output includes the following information:
Interface
Circuit
Management Type
308689-B Rev 00
show frame-relay summary
Interface on which the frame relay circuit resides.
Type of the last error received.
Time of the last error received.
Number of faults received.
Total number of outbound frames dropped because the
circuit is inactive.
Total number of inbound frames discarded because they
were deemed erroneous.
command displays general information about
Interface on which the frame relay circuit resides.
Name of the main frame relay circuit associated with
this interface.
Type of Data Link Control Management Interface
(DLCMI) configured for the interface, as follows:
• Annex A -- Management services as specified by
ITU Annex A.
• Annex D -- Management services as specified in
Annex D to ANSI standard T1.617.
• Annex A Sw -- Management services for the DCE
side of the connection (Annex A).
• Annex D Sw -- Management services for the DCE
side of the connection (Annex D to T1.617).
• LMI -- Management services as specified by
Revision 1 of the Local Management Interface
standard.
• LMI Sw -- Management services for the DCE side
of LMI.
• None -- No management interface between the
router and the frame relay network.
show frame-relay summary
57