Show T1 Ds1 State - Nortel Versalar 15000 Reference Manual

show t1 ds1 state

DM
LCV
show t1 ds1 state
The
MCOC3 channel circuits or for a specific slot. This command allows for the
following options:
-with-alarms
-slot <value>
<value>
value is any of the
following:
<slot>
<slot/conn>
<slot/conn/chan>
The output includes the following information:
T1 over Mct3 state
Slot/Conn/Channel
Admin State
Oper State
Alarms
T1 over Mcoc3 state
Slot/Conn/Channel
Admin State
Oper State
Alarms
156
command displays state information for all MCT3 and
show t1 ds1 state
Number of degraded minutes (DMs) in the specified
interval.
Number of line coding violations (LCVs) in the specified
interval.
Displays status information.
Displays state information for the specified slot only.
Displays information for the specified
slot/connector/channel.
Identifier for the slot, DS3 connector, and T1 channel.
Current administrative state.
Current operational state.
Current alarm state.
Identifier for the slot, OC3 connector, T3 channel, and T1
channel.
Current administrative state.
Current operational state.
Ccurrent alarm state.
308689-B Rev 00