Show Dvmrp Tunnels - Nortel Versalar 15000 Reference Manual

show dvmrp tunnels

show dvmrp tunnels
The
information for all circuits, a specified circuit, enabled circuits, or disabled
circuits.
This command allows for the following options:
-disabled
-enabled
-local
<ip_address_search_
pattern>
-remote <ip_address> or
<ip_address_search_
pattern>
<ip_address> or
<ip_address_search_
pattern>
The output includes the following information:
Local IP
Remote IP
State
Metric
Threshold
44
show dvmrp tunnels
<ip_address> or
command displays DVMRP tunnel configuration
Displays information about disabled DVMRP tunnels.
Displays information about enabled DVMRP tunnels.
Displays information about DVMRP tunnels with the
specified local tunnel end point.
Displays information about DVMRP tunnels with the
specified remote tunnel end point.
Displays information about the specified IP address.
Unicast IP address of local network router.
Unicast IP address of remote network router neighbor.
State of the DVMRP tunnel interface: Up, Down, Init
(initializing), Invalid, Notpres.
Cost (sum of hop metrics along shortest path) of the
tunnel.
Minimum IP time to live (TTL) value for the tunnel (in
hops).
308689-B Rev 00