Show Ip Ospf Ase - Nortel Versalar 15000 Reference Manual

Propagate type-7 default
route LSA
Type-7 default route path
type

show ip ospf ase

The
external (ASE) advertisements. You can display information about all link state
IDs on your router. The output includes the following information:
Area ID
Link State ID
Originating Router
Age
Metric
Forwarding Address
LS Type
Tag
308689-B Rev 00
command displays information about autonomous system
show ip ospf ase
Propagate type-7 default route LSA: enabled or disabled
Type of path applied to the type-7 default route: type1 or
type2.
OSPF area ID that receives and generates ASE
advertisements.
Network number that this ASE advertisement represents.
Router that generated the advertisement.
Age in seconds of the advertisement.
Metric of the advertisement; the cost of the external
route.
Address used to get to this network. If the address is 0,
the traffic is forwarded to the originating router.
Type of OSPF link state advertisement, which can be one
of the following:
• 0 -- stub
• 1 -- router
• 2 -- network
• 3 -- summary link, IP network
• 4 -- summary link, ASBR
• 5 -- external
• 6 -- group
• 7 -- NSSA
• 15 -- opaque
• 16 -- resource
The external route tag from the LSA.
show ip ospf ase
83