Atm Show Commands; Show Atm Interface - Nortel Versalar 15000 Reference Manual

show atm interface

ATM Show Commands

This section provides information on the asynchronous transfer mode (ATM)
show commands and the command options you can enter. It also describes the
information in the tables the router displays.
show atm interface
The
specified ATM interface. This command allows for the following option:
<slot/connector>
The output includes the following information:
Slot/Connector
Current VCCs
PLIM Type
Speed
Framing
TX clocking
MTU
Scrambling
8
show atm interface
command displays statistics about ATM interfaces or a
Displays information about a specific ATM interface.
Slot and port number of the interface.
Number of virtual channel connections (VCCs).
Physical Layer Interface Module (PLIM) type: E3, DS3, or
SONET.
Speed in Mbps.
Type of framing: SONET or SDH.
Clocking on the router:
• Internal -- The AIP or NPM generates the clock (for E3
or SONET only).
• External -- The clock is recovered from the interface.
Maximum transmission unit (MTU) size.
Status of scrambling: on or off.
308689-B Rev 00