Oc3 Show Commands; Show Oc3 Partition Connector; Show Oc3 Partition Path - Nortel Versalar 15000 Reference Manual

show oc3 partition connector

OC3 Show Commands

This section provides information on the OC3 show commands and the command
options you can enter. It also describes the information in the tables the router
displays.
show oc3 partition connector
The
for all OC3 connectors in the box.
This command allows for the following option:
<arg 1>
The output includes the following information:
Slot
Conn
Configured

show oc3 partition path

The
OC3 (SONET) paths in the box. There are three paths per OC3 connector.
This command allows for the following option:
<arg 1>
124
show oc3 partition connector
show oc3 partition path
command displays the current configuration
(Can be either the <slot> or <slot/connector>.) Displays
information for the specified slot number or slot/connector
numbers.
Slot number for the associated OC3 interface card.
Connector number for the associated OC3 port.
Indicates whether the associated OC3 connector is
configured as a fractionalized OC3 board (foc3) or is
currently unconfigured (available for configuration).
command displays the current configuration for all
(Can be either the <slot> or <slot/connector>.) Displays
information for the specified slot number or slot/connector
numbers.
308689-B Rev 00