Show Ifp Input-Ports; Show Ifp Interrupts - Nortel Versalar 15000 Reference Manual

show ifp input-ports

Receive CRC Errors
Bad Descriptor
Dispatch Miss
show ifp input-ports
The
configuration of the IFP input ports. The output includes the following
information:
IFP Slot
Primary CAP
Secondary CAP
Trunk Slot
SSP (DPI)

show ifp interrupts

The
occurring on the IFP. This command allows for the following option:
-slot <slot>
The output includes the following information:
IFP Slot
CAP0 CRC Interrupts
CAP1 CRC Interrupts
SSP CRC Interrupts
66
show ifp input-ports
show ifp interrupts
Number of CRC errors detected on packets received
from any of the four IFP input ports.
Number of packet descriptors received that contain
packet error indications.
Number of packets received that are not recognized by
the present RSP configuration.
command displays information about the connection
Slot number of the IFP.
List of CAP slots (maximum of two) that are attached to
this IFP via their Primary DPI connection.
List of CAP slots (maximum of two) that are attached to
this IFP via their Secondary DPI connection.
ATP slot that has its data DPI attached to this IFP.
SSP slot that has its data DPI attached to this IFP.
command displays information about unexpected events
Displays information about the specified slot.
Slot number of the IFP.
Number of CRC interrupt indications for the CAP0 input
port on this IFP.
Number of CRC interrupt indications on the CAP1 input
port on this IFP.
Number of CRC interrupt indications for the SSP input
port on this IFP.
308689-B Rev 00