Show Dvmrp Interfaces - Nortel Versalar 15000 Reference Manual

show dvmrp interfaces

show dvmrp interfaces
The
DVMRP interfaces. This command allows for the following options:
-disabled
-enabled
<ip_address>
<ip_address_search_
pattern>
The output includes the following information:
Interface
Circuit
State
Metric
TTL Threshold
Route Enabled
Advertise Self
38
show dvmrp interfaces
command displays information about the configured
Displays information about disabled DVMRP
interfaces only.
Displays information about enabled DVMRP
interfaces only.
Displays information about the DVMRP interfaces of the
specified IP address only.
Displays information about the DVMRP interfaces of the
specified IP addresses only.
IP address of the DVMRP interface.
The circuit number that this interface runs over.
Operational state of the DVMRP interface: Up, Down, Init
(initializing), Invalid, Notpres (not present).
Cost (sum of hop metrics along shortest path) of the
routes to cross this interface.
Minimum IP time to live (TTL) required for a multicast
datagram to be forwarded out the interface.
State of the circuit for propagating routing information:
Enabled or Disabled.
Whether the router will advertise its own local networks
over this interface: Enabled (yes) or Disabled (no).
308689-B Rev 00