Show Ip Disabled; Show Ip Enabled; Show Ip Filter Interface - Nortel Versalar 15000 Reference Manual

show ip disabled

The
interfaces. The output includes the following information:
Circuit
Cct #
State
IP Address
Mask

show ip enabled

The
The output includes the following information:
Circuit
Cct #
State
IP Address
Mask
MAC Address

show ip filter interface

The
configured on IP interfaces. This command allows for the following options:
-name <name>
-direction <name>
<interface>
308689-B Rev 00
command displays information about disabled IP
show ip disabled
command displays information about enabled IP interfaces.
show ip enabled
show ip filter interface
Name of the circuit associated with the IP interface.
Number of the circuit in the router's active MIB.
Status of the IP interface: up or down.
IP address of the interface.
Subnet mask of the IP interface.
Name of the circuit associated with the IP interface.
Number of the circuit in the router's active MIB.
Status of the IP interface: up or down.
IP address of the interface. IP address 0.0.0.0 indicates
that the circuit is associated with an unnumbered
interface.
Subnet mask of the IP interface.
Layer 2 address of the IP interface.
command displays information about traffic filters
Displays only those filters on interfaces that match the
specified name.
Displays only those filters on interfaces that match the
specified direction.
Displays only those filters on the specified interface.
show ip disabled
77