Show Sonet Errors; Show Sonet History - Nortel Versalar 15000 Reference Manual

show sonet errors

UASs
CVs
show sonet errors
The
The output includes the following information:
Section
Slot/Module/Connector
BIPs
LOSs
LOFs
Line
Slot/Connector
BIPs
FEBEs
AISs
RDIs
Path
Slot/Conn/Path
BIPs
FEBEs
LOPs
AISs
RDIs
PLMs

show sonet history

The
To view the output of this command, see the
-144.
146
command displays portions of the SONET errors table.
show sonet errors
show sonet history
Number of unavailable seconds (UASs) in the current
interval.
Number of coding violations (CVs) in the current interval.
Slot, module, and connector number of the SONET
circuit.
Number of bit interleaved parity (BIP) errors detected.
Number of loss of signal (LOS) errors detected.
Number of loss of frame (LOF) errors detected.
Slot and connector number of the SONET circuit.
Number of bit interleaved parity (BIP) errors detected.
Number of far end block errors (FEBEs) detected.
Number of alarm indication signals (AISs) detected.
Number of remote defect indications (RDIs) detected.
Slot, connector, and path number of the SONET circuit.
Number of bit interleaved parity (BIP) errors detected.
Number of far end block errors (FEBEs) detected.
Number of loss of pointer (LOP) errors detected.
Number of alarm indication signals (AISs) detected.
Number of remote defect indications (RDIs) detected.
Number of path label mismatches (PLMs) detected.
command displays portions of the SONET entries table.
show sonet current command on
308689-B Rev 00