Using The Diags Command - Nortel Passport 5430 Installing And Operating Instructions

Using the Diags Command

The
system image and rebooting the specified slot.
Note: Although the diags command uses the term field-replaceable unit
(FRU), this document uses the term customer-replaceable unit (CRU).
Table 5-1
Table 5-1.
Parameter
-on
-off
306308-A Rev 00
command controls diagnostics before downloading the operating
diags
describes the
diags
Diags Command Parameters, Variables, and Functions
Variable
N/A
N/A
command parameters, variables, and functions.
Function
Enables powerup diagnostic testing.
Disables powerup disgnostic testing.
This is the default setting.
Starting the Passport 5430
(continued)
5-3