TP CRC Interrupts
Large Frame Interrupts
show ifp queues trunk
The
outbound queues destined for the specified trunk slots. This command allows for
the following option:
-slot <slot>
The output includes the following information:
IFP Slot
TP11 Hi-Depth/Clip
Lo-Depth/Clip
TP12 Hi-Depth/Clip
Lo-Depth/Clip
show ifp queues access
The
outbound queues destined for the specified access slots. This command allows for
the following option:
-slot <slot>
The output includes the following information:
IFP Slot
AP1 Hi-Depth/Clip
Lo-Depth/Clip
AP2 Hi-Depth/Clip
Lo-Depth/Clip
AP3 Hi-Depth/Clip
Lo-Depth/Clip
308689-B Rev 00
show ifp queues trunk
show ifp queues access
Number of CRC interrupt indications for the ATP input
port on this IFP.
Total number of interrupt indications for frames received
in excess of 7168 bytes.
command displays information about the IFP
Displays information about the specified slot.
Slot number of the IFP.
High and low queue current depth and accumulative
packet clips for the TP in slot 11.
High and low queue current depth and accumulative
packet clips for the TP in slot 12.
command displays information about the IFP
Displays information about the specified slot.
Slot number of the IFP.
High and low queue current depth and accumulative
packet clips for the AP in slot 1.
High and low queue current depth and accumulative
packet clips for the AP in slot 2.
High and low queue current depth and accumulative
packet clips for the AP in slot 3.
show ifp queues trunk
67