Show Accounting Summary - Nortel Versalar 15000 Reference Manual

show accounting summary

The
service and the values of key attributes. The output includes the following
information:
State
Status
Log Level
Circular Buffers
Collect Duration (hrs.)
Update Interval (min.)
Flush on Retrieval
Last Update (GMT)
Last Flush (GMT)
308689-B Rev 00
show accounting summary
command displays the state of the accounting
Configured state of the accounting service.
Actual state of the accounting service. Possible values
are: up (1), and down (2). If up , the accounting service is
currently running and collecting snapshots of data if
accounting is configured on any interfaces and queues. If
down , the accounting service is not running or collecting
snapshots.
Level of event log messages written to the log by the
accounting service. Possible values are: all, debug, info,
warning, fault, trace, and infofaultwarning. All writes all
accounting messages in the log, while debug , info ,
warning , fault , and trace write only debug, info, warning,
fault, and trace messages, respectively. Infofaultwarning
logs all info, fault and warning messages.
Indicates whether the collection of snapshots for each
interface and queue should act as a circular buffer.
Possible values here are: enabled (1), or disabled (2). If
enabled , when the maximum number of snapshots in
memory is reached, the oldest snapshot will be deleted
and the next snapshot will be added. If disabled , when
the maximum number of snapshots in memory is
reached, the collection of snapshots will be maintained.
However, no new snapshots will be added.
Duration (in hours) over which the accounting service is
to collect snapshots accounting data.
Sampling interval (in minutes) at which the accounting
service will update accounting data.
Enables/disables a data flush following export of the
accounting data file. Possible values are: enabled (1),
disabled (2). If enabled , the accounting service will clear
all data from local memory when the data file is
transported and start over at the next activation of the
update timer. If disabled , the snapshots of accounting
data will remain in memory following a file transfer.
Timestamp of the last update printed in a display string.
Timestamp of the last data flush printed in a display
string.
show accounting summary
5