Show Ip Rip Enabled; Show Ip Rip Summary - Nortel Versalar 15000 Reference Manual

show ip rip enabled

show ip rip enabled
The
enabled on them. The output includes the following information:
IP Interface
Cct #
State
RIP Sup/Lis
Def. Rt. Sup/Lis
Poison Reverse
RIP Mode
Trig. Updates
TTL

show ip rip summary

The
configured. The output includes the following information:
IP Interface
Cct #
State
RIP Sup/Lis
Def. Rt. Sup/Lis
Poison Reverse
90
show ip rip enabled
show ip rip summary
command displays the IP interfaces that have RIP
IP interface to which the RIP configuration applies.
Number of the IP interface circuit in the router's active
MIB.
Operational state of the IP interface: up or down.
Allows this RIP interface to announce/accept RIP routes.
Allows this RIP interface to announce/accept the default
RIP route.
Method used to readvertise routes out the interface on
which they were learned: poison (poisoned reverse),
actual (actual cost), or split (split horizon).
Type of updates RIP sends: rip1 (Version 1 updates), rip2
(Version 2 updates with no aggregation of subnets), or
aggr (Version 2 updates with subnet aggregation).
Sends RIP updates when routing changes during
5-second intervals.
IP time-to-live set for RIP updates.
command displays the IP interfaces on which RIP is
IP interface to which the RIP configuration applies.
Number of the IP interface circuit in the router's active
MIB.
Operational state of the IP interface: up or down.
Allows this RIP interface to announce/accept RIP routes.
Allows this RIP interface to announce/accept the default
RIP route.
Method used to readvertise routes out the interface on
which they were learned: poison (poisoned reverse),
actual (actual cost), or split (split horizon).
308689-B Rev 00