Frame Relay Show Commands
This section describes the frame relay show commands and the command options
you can enter. It also describes the information in the tables the router displays.
show frame-relay services
The
frame relay services, including the number of VCs. This command allows for the
following command filters and filter arguments:
-service <name>
-interface <name>
The output includes the following information:
Interface
Service-Name
Number-of-VCs -- Total
Number-of-VCs -- Static
Number-of-VCs --
Dynamic
Number-of-VCs -- Active
show frame-relay stats
The
frame relay services. The command supports the following subcommand options:
•
•
308689-B Rev 00
show frame-relay services
show frame-relay stats
dlcmi
errors
command displays general information about all
Displays only frame relay VCs on the specified service
record.
Displays only frame relay services on the specified interface.
Interface on which the frame relay circuit resides.
Unique name assigned to the service.
Total number of VCs configured on this interface.
Total number of static VCs configured on this interface.
Total number of VCs dynamically learned.
Total number of VCs active on this interface.
command displays statistical information about
show frame-relay services
55