Logical-Line Show Commands; Show Logical-Line Bert-Stats - Nortel Versalar 15000 Reference Manual

show logical-line bert-stats

Logical-Line Show Commands

This section describes the logical-line show commands and the command options
you can enter. It also describes the information in the tables the router displays.
show logical-line bert-stats
The
(BERT) statistics collected for a specified circuit.
This command allows for the following option:
-slot <slot>
The output includes the following information:
Logical line over Mct3 bert stats
Name
Slot/Conn/Chan/Index
Bits
Errors
Test Pattern
Logical line over Mcoc3 bert stats
Name
Slot/Conn/Chan/Index
Bits
Errors
Test Pattern
104
show logical-line bert-stats
command displays all Bit Error Rate Test
Displays BERT information for the specified slot only.
User-defined name for the logical line.
Identifies the slot, DS3 connector, DS1 channel, and the
index for this line instance.
The index ranges from 1 to 24 (for T1) and 1 to 31 (for
E1). This number differentiates multiple logical lines
configured on the same DS1.
Running bit count of the bits received by this circuit.
Number of bits received in error by this circuit after being
compared to the test pattern.
Test pattern for BERT.
User-defined name for the logical line.
Identifies the slot, OC3 connector, DS3 channel, DS1
channel, and the index for this line instance.
The index ranges from 1 to 24 (for T1) and 1 to 31 (for
E1). This number differentiates multiple logical lines
configured on the same DS1.
Running bit count of the bits received by this circuit.
Number of bits received in error by this circuit after being
compared to the test pattern.
Test pattern for BERT.
308689-B Rev 00