Show Bgp Routes - Nortel Versalar 15000 Reference Manual

show bgp routes

The
allows for the following command filters and arguments:
<ip_address>
ip_address/prefix
<
-A
-D
-i
-N
-p
-R
The output includes the following information:
Prefix/Length
Peer Address
Next Hop Address
Org
LocPref
B/U
308689-B Rev 00
command displays the BGP routing table. This command
show bgp routes
>
Displays BGP routes for the specified IP address.
Displays BGP routes for IP addresses with the specified
address mask.
Displays all attributes in addition to AS_PATH.
Displays routes damped by route flap damping.
Displays routes to and from the specified BGP peer ID.
Displays the ANNOUNCE pool.
Displays routes to and from the specified BGP peer --
local peer address/remote peer address.
Indicates the regular expression for AS pattern-matching.
IP address of the destination subnetwork and the length
(in bits) of the IP address prefix.
IP address of the interface on the remote side of this BGP
peer connection.
Address of the border router that should be used as the
next hop for the destination network.
Origin code used to calculate preference: IGP, EGP,
Incomplete.
Originating BGP speaker's degree of preference for the
advertised route (from -1 through 2,147,483,647). If this
attribute has not been provided for this route, the value is
-1.
Best/used indication. Best means that the route is the
best BGP route to the destination; used means that the
route is in the IP routing table.
show bgp routes
23