Show Igmp Interfaces Timers; Show Igmp Stats - Nortel Versalar 15000 Reference Manual

show igmp interfaces timers

This command displays information about IGMP timers. This command allows
for the following options:
<interface_ip_address>
i <interface_ip_address>
-
<interface_ip_address_
search_pattern>
-c <circuit_name>
The output includes the following information:
Interface
Circuit
Query Rate
Querier Timeout
Membership Timeout

show igmp stats

The
circuits. This command allows for the following options:
<interface_ip_address>
i <interface_ip_address>
-
308689-B Rev 00
show igmp stats command displays statistical information for all IGMP
Displays IGMP interface information for the interface with
the specified IP address only.
Displays IGMP interface information for the interface at the
specified IP address only.
Displays information for the interface at the IP addresses in
the specified search criteria only.
Displays IGMP interface information for the specified
circuit only.
IP Address currently being used to generate and
multicast traffic.
Name of the circuit on which IGMP is configured.
Specifies, in seconds, how often a local group
membership is queried.
Specifies, in seconds, the amount of time from the last
host query message used to determine the loss of the
IGMP designated router.
Specifies, in seconds, the amount of time that a local
group membership is valid without confirmation.
Displays IGMP interface information for the interface with
the specified IP address only.
Displays IGMP interface information for the interface with
the specified IP address only.
show igmp interfaces timers
73