Show Ethernet Flow-Control; Show Ethernet Qos Stats - Nortel Versalar 15000 Reference Manual

show ethernet flow-control

Flow-control is a method used to control the transfer of data between two points
on a data network. This avoids data loss when the receiving device buffer is full.
The
feature on this router. This command allows for the following option:
-slot <slot>
The output includes the following information:
Slot/Conn
Flow Cntrl Enable
Pause Zero Enable
Pause Time
Received FlowCtrlFrames
Transmit Flow Ctrl Frames
Received Unsupported
Opcodes

show ethernet qos stats

The
of IP packets and bytes transmitted and received over each queue in the assigned
service package. You can specify the following filters with this command:
-slot <slot>
308689-B Rev 00
show ethernet flow control
show ethernet qos stats command
displays information about the flow-control
Displays information about the specified slot only.
Slot location of the Ethernet module within the chassis
and the connector number.
Indicates whether or not the flow-control feature is
enabled.
Amount of time data transmission was paused.
Number of frames received without an error.
Number of frames transmitted without an error.
Number of frames received in a misconfigured state.
displays information about the number
Displays information about the specified slot only.
show ethernet flow-control
49