Figure 61 Static Routes Dialog Box; Figure 62 Static Route Configuration Dialog Box - Nortel BayStack Instant Internet 100-S Using Manual

Figure 61 Static Routes dialog box

3
Click Add.
The Static Route Configuration dialog box opens

Figure 62 Static Route Configuration dialog box

4
In the Destination Address field, enter the IP address of the network to which
you are routing.
5
In the Bits field, enter the number of bits for the network portion of the
address, for example, 24.
If you do not specify the number of bits, 32 (an individual host) is assumed.
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 5 Advanced IP configuration
(Figure
129
62).