Menu ' Menu Switch Settings - Oce 3121 Technical & Service Manual

' * 8 * 2 MENU ' Menu Switch Settings

NL-EQ:
To turn the NL equaliser ON and OFF. Set to ON if an error frequently occurs,
due to line conditions, during the transmission or receipt of a communication.
MONITOR:
To set the monitor function for the telephone line.
If 'DIAL' is selected, a monitor sound (telephone line) will be generated by
I
the speaker between the start of a communication and DIS during transmis-
sion.
If 'SERVICEMAN' is selected, a monitor sound (telephone line) will be gen-
I
erated by the speaker between the start and the end of a communication.
If 'OFF' is selected, no sound will be generated.
I
ATT (P)
To set the transmission level (ATT). Increase the transmission level if an error
frequently occurs, due to line conditions, during the transmission or receipt of
a communication.
A lower value increases the transmission level. As the values are in a
Note:
logarithmic scale, change the value in single steps.
PCI FREQUENCY
Use it to set the frequency of the pseudo CI signal. Increase the frequency of
the pseudo CI signal if the ringing sound fails, due to the type of extension,
when fax to telephone switching is initiated.
DATE
To change the format of the presentation of the date.
76 TSM Océ 3121 SDS Description