*4* FUNCTION 12 Shading Adjustment (for R&D/factory)
Item
Description
R&D/factory
1)Place the standard white paper on the copyboard glass.
shading auto
2)Press 'AUTO SHADING START' on the screen to high-
correction
light; then, press the OK key.
3)When a beep is sounded, press the OK key. ('LAMP
LEVEL' will be indicated on the screen while the lamp is
being adjusted.)
If no beep is heard, turn VR1 on the DC controller PCB so
that a beep will be heard; then, press the OK key.
4)End the operation when 'END' appears on the screen.
Guide to the Screen
58
TSM Océ 3121
Reference
page
SDS Description