Function 10 Test Print - Oce 3121 Technical & Service Manual

*4* FUNCTION 10 Test Print

Item
Test print output
L-TEST1: Solid black test print
1
Use it to check white spots or white lines.
I
If white spots are noted, suspect dirt on the transfer charging roller or the sep-
I
aration static eliminator.
If white lines are noted, suspect shading faults because of dirt on the standard
I
white plate
ed.1
Description
Select the desired test print (press the item to
highlight); then, press the OK key.
L-TEST1: solid black test print
L-TEST2: halftone test print
L-TEST3: blank test print
L-TEST4: 17-gradation test print
L-TEST5: grid test print
L-TEST6: vertical line test print
L-TEST7: horizontal line test print
Reference page
SDS Description 53