Operation - Oce 3121 Technical & Service Manual

4 Operation

Set indication
The set indicator is switched ON when a document is placed on the document
tray.
The set indicator flashes when a document jams.
A4/B5
Using the RDF
If the document is size B5R or size A5 or larger (in feeding direction), open
1
the tray.
Set the side guide to suit the size of the original.
2
When copying documents with a width exceeding 297 mm, it is neces-
Note:
sary to release the guide lock.
Place the stack of documents in the document tray, with the first page at the top.
3
Select copier mode or fax mode, as appropriate.
4
Press the copy button.
5
Warnings and Actions
If the set indicator starts to flash, while the documents are being fed, this may
be due to a jammed document.
Proceed as follows:
Remove the documents from the document tray.
1
Open the RDF cover, and remove any document that is jammed.
2
Then, open the RDF to clear the warning.
Remove any documents from the platen.
Sort the documents into their original sequence. Replace the stack of docu-
3
ments in the document tray.
506 TSM Océ 3121
A3/B4
Functional description