Adjustment Of The Electrical System - Oce 3121 Technical & Service Manual

13 Adjustment of the Electrical System

After replacing the main components
Main components
RDF control PBA
I
The sensor for the doc-
I
ument tray (S).
Registration sensor
I
(S3).
Document width (VR1)
I
Adjusting the sensor (S1) in the document tray, and the registration sen-
sor (S3)
Remove the RDF cover.
1
Shift bit 4 to ON : DIP switch (DSW1) on the RDF control PBA.
324 TSM Océ 3121
Adjustments
The level of the document sensor (S1).
I
And the registration sensor (S3).
The width of the document (VR1).
I
The parallel transport 1 .
I
The sheet gap in the image composition mode.
I
The level of the sensor in the document tray (S1).
I
The registration sensor (S3).
The level of the document sensor (S1).
I
And the registration sensor (S3).
The document width detection (VR1).
I
Adjustments