Oce 3121 Technical & Service Manual page 810

Contents
SDS Description
1 Outline 1
2 Starting Service Mode 2
Keys 3
Using Adjustment Mode and Settings Mode 4
3 *1* DISPLAY (control display mode) 6
*1* DISPLAY 01 Temperature Indication 6
*1* DISPLAY 02 Jam History 1 7
*1* DISPLAY 03 Error/Alarm Indication 10
ALARM (RDF) 10
Overstacking alarm (Multi Tray-12) 12
Partial fault alarm (Multi Tray -12)) 12
Stapler alarm (Multi Tray-12) 13
*1* DISPLAY 04 Version indication 1 14
14
*1* DISPLAY 05 Version indication 2 15
*1* DISPLAY 06 Key/Editor Indication 15
*1* DISPLAY 07 Copy Paper Size Indication 17
4 *2* I/O DISPLAY (I/O display mode) 20
*2* I/O DISPLAY 01 Inputs/Outputs to and from the Image Processor PCB 20
*2* I/O DISPLAY 02 I/O ports on the DC controller PBA 23
*2* I/O DISPLAY 03 28
*2* I/O DISPLAY 04 Gate Array Input/Output of the DC Controller PCB 29
*2* I/O DISPLAY 05 Input/Output Port 1 of the Feeder 29
*2* I/O DISPLAY 06 Input/Output Port 2 of the Feeder 32
*2* I/O DISPLAY 07 Input/Output Port 1 of the Sorter 33
*2* I/O DISPLAY 08 Input/Output Port 2 of the Sorter 35
5 *3* ADJUST (adjustment mode) 36
*3* ADJUST 01 Fine-Adjusting and Entering the Multifeeder Paper Width Basic
Setting 36
*3* ADJUST 02 Primary Charging Roller/Transfer Charging Roller/Developing
Bias 37
*3* ADJUST 03 Back-Up Data for the Composite Power Supply PCB 38
*3* ADJUST 04 Image registration adjustments 39
*3* ADJUST 05 Scanner-, Cassette-, and Laser-Related Items 40
*3* ADJUST 06 Adjusting the AE/Fixing Assembly Settings 42
*3* ADJUST 07 Shading Back-Up Data 43
*3* ADJUST 08 Adjusting the Transfer Charging Roller Bias 43
6 *4* FUNCTION (function mode) 44
*4* FUNCTION 01 Clearing Errors 44
*4* FUNCTION 02 Stirring the Toner 45
ed.1 SDS Description