Relocating The Machine - Oce 3121 Technical & Service Manual

3 Relocating the Machine

Perform the following work if the machine needs to be relocated, by truck or
other means of transportation:
Points to note
1
If it is necessary to move the copier from room to room, and the copier is on
the pedestal, do not lift the copier with your hands in the grips. This could sep-
arate the copier from the pedestal.
Before relocating the Machine
2
Step Adjustments
1 Remove the OPC.
2 Fix the scanner in place.
3 Tape the charging assemblies
and the feeding unit releasing
lever in place to prevent dis-
placement by vibration.
4 Tape the front door and the
delivery unit in place.
5 Place a single sheet of A3 copy
paper on the platen, and tape
the platen cover (feeder) in
place.
Lifting the copier off the pedestal
3
Step Adjustments
1
Open the pedestal's right corner, and
release the guide (shift to the right)
used to join the pedestal and the
copier.
2 Hold the copier's grips, and lift the
copier upright so that the pedestal's
pin will slide off the holes. (Work in
a group of two.)
3 Lower the copier on the floor or on a
desk.
24 TSM Océ 3121
Checks
Put the OPC unit in a separate box for transport.
Checks
Installation