To reset, remove the originals from the original tray and then open the
Note:
RDF.
Overstacking alarm (Multi Tray-12)
Code Nature
02H
Overstacking
of paper
Partial fault alarm (Multi Tray -12))
Code Nature
10H
Partial fault
12
TSM Océ 3121
Cause
The paper being
stacked during multi
tray operation has
exceeded the capacity
of a single bin.
Cause
An error occurred in
the bin unit feeding
motor M2, bin shift
motor M1, guide bar
swing motor M4 or
stapler swing motor
M5; the same type of
error has occurred
after turning off and
on the power
Operation
Display
Stops upon
Indicates a
detection
message on
overstacking
the copier's
control panel
Operation
Display
Prohibits
No indication Remove all
delivery to the
sorter; how-
ever, permits
delivery to the
tray.
Resetting
Remove all
paper from the
bin
Resetting
the cause of
the error, turn
off and then
on the power.
SDS Description