Removing The Feeding Motor - Oce 3121 Technical & Service Manual

6 Removing the feeding motor

Remove the pick-up motor
1
Remove the cable tie.
2
Disconnect the connector J11 (2) from the RDF control PBA (1).
3
Disconnect the connector (3) for sensor (S9) and remove the two screws (4).
4
e
Detach the two drive belts (5), and remove the feeding motor (6).
5
406 TSM Océ 3121
(1)
r
(4)
(5)
t
y
(6)
(2)
r
(4)
Dis-/assembly