Dis-/Assembly; Fuser Drive - Oce 3121 Technical & Service Manual

Dis-/assembly

1 Fuser drive

Removing the fuser drive
Disconnect the mains supply cable.
1
Remove the rear cover (4 screws).
2
Remove the flywheel (3 screws).
3
Remove the DC control PBA (2 screws, connectors).
4
Release the tension spring (2), and remove the drive belt.
5
Remove the two screws, and remove the support (3).
6
Remove the power supply PBA ( two screws, connectors).
7
ed.1 17 Fusing 401