Adjusting The Solenoid Sl3; Adjusting The Document Width (Vr1) - Oce 3121 Technical & Service Manual

5 Adjusting the Solenoid SL3

Remove the cover.
1
Adjust the position of the solenoid (1), so that the stroke is 4.5 mm.
2

6 Adjusting the document width (VR1)

Loosen the screw (2), and remove the side guide.
1
Fully open the rear guide (3) and the front guide (4).
2
(3)
ed.1
(2)
(1)
(3)
(1)
10 RDF 305