Removing The Sensor P15 For The Guide-Home Position - Oce 3121 Technical & Service Manual

12 Removing the sensor P15 for the guide-home position

Remove the transport unit
1
Remove the bin unit and the bins from the sorter assembly. (See "Removing
2
the Bin Unit" and "Removing the Bins.")
Remove the cable cover from the swing motor.
3
Remove the screw (2), and remove the position sensor P15 (1).
4
If the detection of the home position fails, adjust the position of the sen-
Note:
sor P15.
Adjusting screw
ed.1 21 Sorter 421