Speciality Tray - Oce 3121 Technical & Service Manual

2 Speciality tray

Removing the speciality tray
Open the speciality tray (1). Insert a screwdriver into the top of the connector
1
cover (2), turn the screwdriver and remove the cover. Disconnect the connector.
Close the speciality tray. Open the right door. Pull out the rolls (3): left and
2
right.
3
Remove the speciality tray
3
When fitting the cover, align it at the top before pushing in the bottom.
Note:
Removing the pick-up roller
Pull out the rolls.
1
Detach the cable from the cable, and remove the right door (1).
2
402 TSM Océ 3121
2
1
3
1
Dis-/assembly